Samsung GT-E1205T Mic Solution Jumper Problem Ways Mic Not Working Microphone
Today we are going to give in this post, how to fix the mic problem in the hardware of Samsung E1205T by jumper solution. In this type of problem you can hear the voice of others on call, While they aren’t able to hear you.
How to fix the Mic not working problem
Here in below you can see the image, That image says to fix the mic problem. Just you may have to do two Works of your phone hardware area, Then it will work.
Changing Samsung GT-E1205T mic can be a little tricky. It is soldered on the motherboard so if you remove it remember it’s placing position and put the new microphone the same way the old one was. If you have broken prints of the microphone connection points I have marked all of them in the diagram below.
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.
Reason for the mic not working problem?
A lot of reasons available for mic not working error come to Samsung E1205T phone. Therefore, we give some main reason for the problem.Water damage or Water drops going in the phone (moisture)
Throwing On the ground
Christening in tight trousers
Dust going in Mic hole
Mic paths broken or mic area spare parts Being not work
If you have any further Questions please leave a message.
Keep in mind:- The every solutions posted on Our website is well tested before by our specialist team, But still we do not take any responsibility for any damage it may cause to your cell phone. Use these repairing solutions at your own Risk, Thank you.
Samsung E1205T,Mic,Microphone,Mic Problem,Mic Solution,Mic Jumpers,Mic Ways