Samsung Galaxy Alpha G850F camera problems are not very usual but they can occur sometimes. Like if you drop your Samsung SM-G850F camera connector can be damaged. Normally changing the camera connector solves this problem but if it’s prints are damaged then you have to make jumpers to their respective connecting points.
Now you will notice that some of the camera connector legs jumpers are not marked in the diagram. That is because I could not trace their source and the others are just ground. Anyway I have managed to trace all the important prints and made the jumpers lines with different colors to make it easy to understand. colored marked jumpers are always Ground points.
Before using or applying this solution ensure to restore,flash and update,
the device firmware on Samsung Galaxy Alpha G850F. Oftentimes camera failure is cause by an interrupted firmware, restoring or flashing it back again will fix the problem. But
if that does not solved the problem you may then proceed to hardware repair troubleshooting, especially
if the device suffered from wet damaged and accidentaly dropped by the user.
The problem may possibly lies on faulty hardware components.
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Samsung SM-G850F Camera Problem,Camera Solution,Camera Ways,Camera Jumpers,Camera Standby