If the Samsung Galaxy Tab 3 10.1 P5200 shows a dark screen display it means that the Display Light on it is not working or caused the problem. This solution below might possibly help fix the Samsung GT-P5200 with Display Light Problem.
To fix and repair the device you may first try: Replace the LCD screen module just to easily confirm if the LED’s on it is still working or not. If the it still shows a dark screen display, you may refer to the solution below and do have a check and test procedure on some components and connection line paths of the LCD display LED.
Samsung Galaxy Tab 3 10.1 P5200 Display Light Jumper Ways
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.
Here are Samsung Galaxy Tab 3 P5200 Display Lights jumper ways. Please study these diagrams very carefully before you start repairing.
Hints for repair:
– Visually check the flex connector, if oxidized, clean it.
– Check the 3.8V battery voltage across the filter coil. Check/replace also the coil.
– Trace the LED+and LED – connection line paths from the flex connector down to the capacitor and resistor where it is connected.
– Replace the Display LED Driver IC.
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Samsung Galaxy Tab 3 P5200,LCD Display Light,Display Light Problem,Display Light Solution
Samsung GT-P5200 Display Light Jumpers,Display Light Ways,White Display ,Blinking Display,Blank Display,Keypad Light