Nokia Lumia 900 Charging,Solution,Jumper,Problem,Ways
Here is the solution for Nokia Lumia 900 Not Charging problem like there is No Charging indication shows on the display when the battery charger is being plug-in.
This problem is may caused by a faulty charger or a faulty components on Nokia Lumia 900 PCB board. This problem may sometimes happens if the device suffered wet or water damaged or just exist.
Before proceeding, ensure that the battery and the battery charger are in good working condition.
– Check all the components shown on the image below, you may start by checking the USB pin connector.
– Then the fuse, diode, capacitors and filter coil for possible open or short circuit.
– Trace each of the connection line paths from USB pins down to the components where it is directly connected.
The schema already contained in the full path USB charging Lumia 900, and you just do jumpers track usb charging properly, so that you can get your android phone recharging as before, and you do not need recharging using other charging instrument .
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Nokia Lumia 900 Charging Solution Jumper Problem Ways No Charging Not Supported
Nokia 900,Charging,Charging Problem,Charging Solution,Charging Jumpers,Charging Ways