Samsung Galaxy Tab 3 T111 Power Button Problem Ways

Samsung Galaxy Tab 3 T111 Power Button Problem Ways
Samsung SM-T111 Power Switch Ways On-Off Button Jumper

In Samsung Galaxy Tab 3 T111 power button is soldered on the motherboard just like the volume keys. Power button is used to turn on and off your mobile phone and is placed on the right side of the mobile phone just below the volume keys. It is almost a fragile part because using it roughly can damaged it and if that happens there is good chance that the prints below the power button might also get damaged.
So if your Samsung SM-T111 power button is not working to repair it you just need to replace it with a new one. If the prints of the button are damaged then you are going to have to make the jumpers as shown in the diagram.
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.
Here is Samsung Galaxy Tab 3 T111 power button not working repairing solution. Please study these diagrams very carefully before you start repairing.


 
The first step that should be done is certainly the damage caused on the power button on the phone can not turn on, to make sure the power button is broken, you can try charging or charging the phone whether it is charging or not. If you can try the second charging.
The second step you can check the track as in the picture above, check the lines one by one and also the resistor is connected on the power switch on, if there is a path-breaking try doing jumper carefully and thoroughly.

Damage or fault repairs caused by the existing solutions on this blog is not liable BuntyGSM, we just want a little help you in improving your mobile phone. Samsung SM-T111 Power Button,Power Key,Power Switch,On Off Button, On-Off Switch, Power Problem

Samsung Galaxy Tab 3 T111 Power Button Problem Ways