IMET

A33, Govind Plaza,
Lalkurti, Meerut Cantt. (UP)
PIN: 250001
Contact No +919411667220

Email:
bijendra.narsinghani@gmail.com

Website:
Navigation

Infinity Chinese Miracle-2 MTK V2.00 Latest Update

Infinity Chinese Miracle-2 MTK V2.00 Latest Update
Download Infinity Chinese Miracle-2 MTK V2.00 Latest Update
Download Infinity Chinese Miracle 2 MTK Latest Update 1
Infinity Chinese Miracle-2 Software for GSM and CDMA models. World-famous ‘Chinese Miracle’ software for MTK / MediaTek, etc. World-famous ‘Chinese Miracle-2’ software for MTK / MediaTek, SPD / Spreadtrum, RDA / Coolsand, etc.


Infinity Chinese Miracle-2 MTK/Mediatek v2.00 r4 – MT6771 support and other features !

Important:
– Software installed to new folder /CM2MT2/ and designed to support new models
– Smart-Card firmware v0136 is Ok to use this version
– DO NOT uninstall previous version 1.58 ! If you are trying to connect phone with new software and see a message like LEGACY MTK you should use version 1.58 for this device !

– Main 
Connection level revised
BROM level support optimized


MT6771 CPU supported!
MT6771 moved from TEST to GENERAL support.
Firmwware read
Firmware write
NVRAM read
NVRAM write
Reset Settings / Format FS
Reset FRP
Reset Privacy
MemoryTool

– Service
Repair Security revised. Fixed issues with some NV types.

– Core 
EMIDB updated
Hint/Error explain module updated
MT6758 support under test
MT6765 support under test

– FW reader 
MT6771 supported
New types of firmwares supported
Scatter creation optimized 

– SP Unlock
Revised unlock support for some models
Info: MT6739/MT6763/MT6771 IS NOT supported YET!

– New models included
Limited Oppo support (F7/A3)
Limited Vivo support
And diffirent other models
Some other basic “generic” secure devices support optimized

Known issues/warnings/info: 1. [NAND on MT6570] v1712, v1736 loader packages SHOULD NOT BE USED due to these packages have ftl/ecc errors! In result you will give read/write FW errors and rest problems at all. Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write 2. [NAND on MT6570] In some cases “stuck on logo” devices can be fixed only via FFU (whole flash) format! 3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal behaviour and can not be fixed. Read-Write data, which you want, ignore “EMPTY” states. 4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result – stuck after system/userdata partition flashing 5. FileSystem flashing on some SBC-enabled devices (except SYSTEM/CACHE/USER) may fail ! Solution – exclude them from flashing list. 6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases ! 7. Meizu support is limited by Preloader Level ( No BROM SLA ) – you must UNTICK “PMT Update” and “PRELOADER” partition from flashing list! 8. [NAND on MT6570] In some cases device MAY BE DEAD after flashing! Make sure you have TESTED firmware version! If you have download FW from internet/other source – make sure it preloader CONTAIN 3 EMI record! Preloader jc45btlc with 2 records KILL SOME DEVICE TO UNRECOVERABLE STATE ! Preloader info shown now during FW load.



Download Infinity Chinese Miracle-2 MTK V2.00 Latest Setup
Important:
– Software installed to new folder /CM2MT2/ and designed to support new models
– Smart-Card firmware v0136 is Ok to use this version
– DO NOT uninstall previous version 1.58 ! If you are trying to connect phone with new software and see a message like LEGACY MTK you should use version 1.58 for this device !






Infinity-Box Dongle contains the following software, hardware and support:
Software for GSM and CDMA models
World-famous Chinese Miracle software for MTK / MediaTek, etc.
World-famous Chinese Miracle-2 software for MTK / MediaTek, SPD / Spreadtrum, RDA / Coolsand, etc.
Protection Smart-Card
USB Smart-Card reader
Support area access (software, flash files, drivers, manuals, updates, bug-fixes, etc.)
Smart-Card upgrade server access
Support via e-mail
Support forum access

Features:
Well known GSM and CDMA brands / models supported
Chinese Miracle MTK based brands / models supported
Standalone software (no Internet connection required)
SP-unlock: unlock (remove / clear) network, provider locks
Set network, provider locks
Read unlock codes
Flash read / write (high speed)
Write any part of Flash separately (firmware, customization, flex, map, file system (FFS), language pack)
Upgrade / downgrade firmware
Repair damaged IMEI
Remove / clear / read user / phone lock code
Reset to default / factory settings
Repair dead phones
Read Flash / EEPROM area backup
Repair software-related problems
Read unlock codes: network, provider codes, user / phone code
Empty board flashing (for example, after flash chip replacement)
Format file system
SCAT files read / write
Create security zone backup during critical operationsSmart write option, together with high-speed option flashing speed may be extremely high
Detect keyboard codes by flash file (Keyboard codes detector)
Save operation process results in a Log file
Big flash files database for all World regions
Compact flash / EEPROM files format: flash / backup files internally packed and unpacked on the fly. That way you can save up to 50% of your Internet traffic (download small files from support area) and save a lot of disk space on your HDDCounter for unlock / flash / other operations
Easy to use brand / model selection via Shell
Easy access to cables / pinouts information via Cable selector
Easy access to support area via automatic logon system and
Support managerHuge flash files database: firmware, language pack, flex, map, repair EEPROM, FFS files, etc., more than 20,000 files for different models
Documentation and manuals with step-by-step instructions
Multi-language User Interface (MUI)


Share
Banner

Bijendra Narsinghani

Post A Comment: