Sep 19, 2018
![Samsung Galaxy Xcover 4 G390 Combination File [Bypass FRP Lock]](https://4.bp.blogspot.com/-hUxItyb06V0/W6IsXEV9xgI/AAAAAAAATdg/OPZZOKKO0mUTlcAGCTj1zSMpLX_Sf0riQCLcBGAs/s1600/Samsung%2BGalaxy%2BXcover%2B4%2BG390%2BCombination%2BFile%2B%255BBypass%2BFRP%2BLock%255D.jpg)
Download Free Samsung Galaxy Xcover 4 G390 Combination File To Bypass FRP Lock
Download Links:
1. Samsung Galaxy Xcover 4 (SM-G390F)
- Combin:
- Full: G390FXXU2ARF2_G390FBTU2ARF1_BTU_7.0_FULL.zip (1,6G) | LINK MAX SPEED
2. Samsung Galaxy Xcover 4 (SM-G390W)
- Combin: COMBINATION_OYA_FA70_G390WVLU1AQE2.zip (581M) | LINK MAX SPEED
- Full: G390WVLU1AQJ1_G390WOYA1AQJ1_XAC_7.0_FULL.zip (1,7G) | LINK MAX SPEED
3. Samsung Galaxy Xcover 4 (SM-G390Y)
- Combin:
- Full: G390YDXU2BRH7_G390YOLE2BRH7_XID_7.0_FULL.zip (2,0G) | LINK MAX SPEED
How To Flash Samsung Galaxy Xcover 4 G390:
- Backup your data (videos, photo, messages, contacts,…)
- Extract (unzip) the firmware file
- Download latest Odin tool
- Extract Odin ZIP file
- Open Odin
- – Other options in case first option did not work or isn’t possible.
– Option 2 VOLUME DOWN + VOLUME UP than USB cable
– Option 3 POWER + VOLUME DOWN + VOLUME UP
– Option 4
– Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY - Connect phone and wait until you get a blue sign in Odin
- Add the firmwares file to Odin:
– Add the BL_xxx file to BL
– Add the AP_xxx file to AP (if firmware is a single file add to AP)
– Add the CP_xxx file to CP
– Add the CSC_xxx file to CSC - Add the PIT file to Odin: choose “Pit” tab, click “PIT” and open *.pit file (skip if flash stock firmware not include PIT file)
- Click the start button, sit back and wait few minutes
How To Bypass FRP Lock From Samsung G390:
- Install driver: SAMSUNG_USB_Driver_for_Mobile_Phones.zip (15.3MB)
- Power off your phone and reboot to DOWNLOAD MODE (press Volume Down + Volume Up + Power, then press Volume Up to continue)
- Flash Combination rom by Odin 3.13.1
- Continue, go to Settings > Developer Options >turn on USB Debugging
- Back to home screen, open IME app, type *#0808# > choose DM + ACM + ADB and Reboot
- Install ADB driver: adbdriver.zip
- Download and extract ADB-FRP.rar > run FRP_addROM.bat
- Power off your phone and reboot to DOWNLOAD MODE, again
- Flash full rom by Odin. Select full enough 4 files:
– AP: select to AP_G390xxx
– BL: select to BL_G390xxx
– CP: select to CP_G390xxx
– CSC:select to HOME_CSC_G390xxx - Finally, wait for Odin show up PASS, your phone will reboot and done
Some of the most common problems that have been reported so far by the users of iPhone 5S is the Blue Screen of Death problem. This “Blue Screen of Death” is not the name given by Apple, but by the people who are experiencing this issue. Previously Apple was not able to point out the reason of this problem and they only said that they are working on a new iOS update that will help people to resolve their problem; however this problem isn’t resolved so far.
Remove FRP Lock From Sony Xperia L1 G3312 Reset Pattern
How to Remove FRP Lock From Sony Xperia L1 G3312
- Download and install USB drivers in your computer. To download drivers click here.
- Download and extract Sony Xperia X or variants firmware in your pc.
- Install Sony Xperia Flash Tool in your PC by
- Flash tool will be installed in your C drive root folder (C:\). Open it from that drive.
- Click on Flash button to load the flash files.
- Once you click flash button, it ask for choosing Bootmode. Check Flashmode from the pop-up dialog.
- Click Load button and load the Sony Xperia L1 firmware file which ends with .ftf extension.
- From the right pane below firmware select the loaded firmware.
- Click on flash button to flash to unlock Sony Xperia L1 frp.
- Switch OFF your device. Press and hold Vol down button and connect with computer.
- If your device successfully connected. It start flashing firmware so we can move to Sony Xperia L1 G3312 bypass.
- Once it done, disconnect your device and remove it. If this not works make sure to follow step 10 properly.
Download Samsung 300k Tool – Enable Download Mode Without Keys
How to Use Samsung 300K Tool
It supports Android, Qualcomm Cpu, and Broadcom Cpu. Get the Android version Samsung 300k Tool APK from here.
Download Samsung 300k Tool
Steps to Enter the Download Mode
Run the tool on our PC
Activate USB Debugging on the device.
Connect the device to the PC with the USB cable.
Wait for the program to tell us that the device is connected.
Click on the image that has a resistance painted on it.
Activate USB Debugging on the device.
Connect the device to the PC with the USB cable.
Wait for the program to tell us that the device is connected.
Click on the image that has a resistance painted on it.
