Micromax Q416 FRP Reset Done

Finally Micromax Canvas Pace 4G Q416 FRP reset done without any box this device not going to fastboot or other boot but when try press and hold Volume Down + Power button then device will go to engineering mode all test so here simple method for that no need to any mode just following this tutorial you are easily you can do  i suggest first read all carefully this tutorial after try step by step because this is tested

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link

Micromax Canvas Pace 4G Q416 Firmware Download Here

Required for FRP Reset:

1. Micromax Canvas Pace 4G Q416 with good battery charged

2. Micromax Canvas Pace 4G Q416 tested firmware

3. Micro usb cable

4. Computer or Laptop

Procedure:

1. Download tested firmware from above link (if link not working just write down comment on below comment box)

2. Extract to desktop or as you like path (must installed winrar software in computer or laptop)

3. Open XQDA Flash tool

4. Choose firmware directory in ver dir option

5. Choose EmergencyDownloadVersion, Emergency Download ver,Retain NV(Used for Repair) means this is dead option

6. Turn off device and Press and hold both keys your dected quclom and make 9008 port

7. Click on Start All button

8. Wait until full install (note : do not unplug while device flashing mode)

9. Congratulation you are done from FRP or other software issue

Note : This process also work on dead phone if detected 9008 port