So if your iPhone 5s power button is not working to repair it you just need to replace it with a new one. If the prints of the button are damaged then you are going to have to make the jumpers as shown in the diagram.
First of all check the phone if anything else is not causing this problem. If your phone is off and you can’t check the button plug the charger in and see if the phone is charging, if it isn’t turning and it isn’t charging too then probably the problem is with your phone’s software and you need to flash it. If the phone is on or charging but the power button is not working make the jumpers as shown in the diagram below.
Repair hints for Power Switch problem on iPhone 5s:
1. Check the power switch assembly, if the assembly is damaged replace the switch.
Sometimes even if the power switch is not not visually damaged, see to it that it still working by using a
2. For lifted button switch solder terminal pads on the PCB board, manage to re-establish the switch to its original position and bond it perfectly so that it won’t easily break. Then manage to reconnect the power switch line paths and the ground connection. If you can see an empty components solder pads just below of it, you can connect it to that spot. that is also connected to the power switch.Apple iPhone 5s Power Button Ways,iPhone 5s On Off Key Jumper Solution, Set Is Dead Problem
iPhone 5s Power Button,Power Key,Power Switch,On Off Button, On Off Switch, Power Problem