A33, Govind Plaza,
Lalkurti, Meerut Cantt. (UP)
PIN: 250001
Contact No +919411667220



iPhone 5s Display Light Solution Backlight Ways Lcd Jumper

iPhone 5s Display Light Solution Backlight Ways Lcd Jumper
iPhone 5s Display Light Jumper Solution Lcd Ways
iPhone 5s Display Light Solution Back light Ways Lcd Jumper
The most Apple iPhone 5s phones come with the Back light is not working Problem. Therefore, we are provide a new way solution to fix the Back light problem. Our new way solution to install on your phone, no need to remove or heat your phone Back light area ic,coil,transistor spare parts because the solution is a Jumper way planning. so we hope the solution will be Easy to you and we’re completely tested, it’s exactly working. OK now, let’s see how to FIX this error.
In iPhone 5s there are 3 led lights and their power comes from the LCD’s flex cable. So if your phone’s LCD led lights have stopped working I have marked all of their jumper ways in this diagram. Make the jumper from LCD connector to it corresponding point and hopefully your problem will be solved. 

Equipment Required
Fine wires
How to Make a Jumper in the Socket Display
Prepare a cable smooth and adjust the length that we will connect its tracks
Heat Tin with solder for attaching fine wires so that it will closely united.
Use a voltage tester to measure the jumper cables.
Tips & Warning
Make sure the jumper cables are connected properly so that it can deliver a good flow.
Make sure that the jumper cables are not connected directly with the other jumper cable.
The only hint of BuntyGSM on how to make a lane jumper socket on the Nokia 111. good luck
iPhone 5s LCD Display IC Solution Jumper Problem Ways LCD Display Not Working
iPhone 5s,LCD Display, Display Problem, Display Solution, Display Jumpers, Display Ways, White Display, Blinking Display, Blank Display

Bijendra Narsinghani

Post A Comment: