A33, Govind Plaza,
Lalkurti, Meerut Cantt. (UP)
PIN: 250001
Contact No +919411667220



All Micromax Boot Mode Keys Combination By BuntyGSM Mobile Repairing Institute

X231 no key need to press, with x11i cable.
X368 press 1 or green key before connect to flash tool or maui meta,Flashing Cable-X265
X660 volume down key press before insert data cable-3 for sw( Flahing cable-5: SPAMOB1800 can also be used)
X283 press 0 no. key before connect X11i flashing cable for maui meta or flashtool.(select USB in comport)
X288 : Flashing cable-6, SPAMOB1192
A73 : Both keys home and back, before insert cable,
A78 : Volume UP key, before insert cable.
X271: Press Green/calling key before insert download cable.
X1i reloaded : Data cable-3,press calling/green key before download.
X640 : SW with volume Upkey and normal USB
X256,X257 : X11i flashing cable, press calling key
X275 : normal USB, data cable-3,LSK need to press
X335 : Data cable-3, with Calling key
X274 : Flashing cable-4,SPAMOB0587,same of Q5fb
Q55 Version 13 is available on FTP with name New BT090910
GC200 Flashing : cable is common with GC257 SPAMOB3554(cdma)

X246 : cable is common with X11i and X550.( Need to press 0 to start, hold and press * key while sw update)
X223 Flashing : X11i cable, Green key for downloading
X78 : Data cable -3, green key pressing for software update.
X450 : SPAMOB6114-Flashing cable-X450, otherwise disconnect Vcc line from SPAMOB1800 cable and use as alternative flashing cable.
Q85: Data Cable-3,RSK need to press.
Q36 : Use Data cable-2 for Flashing & Press & hold 'Space' key before insert cable for flashing 
X312 Flashing : X11i flashing cable , 0 key need to press
X259 : X11i Flashing cable ,Green/calling key need to press.
X210+ Flashing : Calling key + Normal USB cable
X445 Flashing : X11i Flashing cable with center key pressing.
X1i Xtra : X11i cable for Flashing, with X290 cable.
X45 Flashing : X11i Flashing cable,no key need to press
X44 Flashing :X11i Flashing cable ,RSK need to press(data cable-3 with 0 key)
A50 : Data Cable-3,Volume down key
A80 Flashing : X11i cable, direct software, without pressing any key
X277 : Flashing cable of X11i, LSK need to press for flashing.
X234 :X11i Flashing cable, * (Star)key need to press
A84 Flashing : Copy SW in blank memory card, insert in phone, switch on with pressing Volume UP + Down keys together, SW starts automatically.
X294 Flashing : With X11i cable, LSK key need to press while flashing.
A52 Flashing cable X11i cable.
X102/X274/X490 : Flashing Cable -4 : SPAMOB0587
X276 Flashing : Data cable 3 with 1 key press.
X291 : cable is common with X11i and X550.( Need to press * to start, hold and press * key while sw update)
C190 : Data Cable-2
X268 : Flash with X11i cable, # key need to press before connecting cable.
Q34 :X11i Flashing cable ,Call key need to press
A45 : Flashing Cable-7 , SPAMOB1951
X50 : Data cable-3, LSK Key
X331 : X11i Flashing cable, Press Calling key for downloading.
X275 : LSK Key, X11i Flashing cable
X278 : Data Cable-3, Press '1' key before connect cable for Downloading to make USB COM PORT.
X292 : X11i cable, no need to press any key while connect with tool
A57,A87: Copy and paste SW folder in memory card, extract or wo extract, Volume UP key + Power ON to start download.
A84: Copy and paste SW folder in memory card,extracted SW files, VolumeUP+Down+ Power ON key to start download.
X293 : Falshing with Data cable--3, No need to press any key for flashing,MTK Flshtool 5.1220.
X101,X103 : Flashing with Data cable-2(LSK), with CABLE-SPAMOB5760,
write  in tool, press write, insert cable in phone w/o battery, then at last insert battery in phone.Sample passed

X455(White+Black)SW joint),X1iXtra,: Cable name-Flashing cable-X455 Spreadtrum (SPAMOB5761)

X279 SW(Joint Black+white),A73(no joint),X455 (NO JOINT),X292SW(Black+white),X324(SW Bl+Wh joint): MSTAR cable(SPAMOB5762)

X331i(6250A) : Select .cfg file not Scat.LSK KEY need to press before insert Data cable-3.

X456 : No need to press any key for flashing, with Data cable-3 And X11i Flashing cable(B type cable)

X293: Falshing with Data cable--3 or X11i flashing cable, No need to press any key for flashing,MTK Flshtool 5.1120,Select cfg file in place of scat file.

X234C : 'Music' key need to press before connect to DATA CABLE-3 or X11i Flashing cable for Flashing.
P350 :Press Vol+ and on/off switch inset the data cable hold the Vol+ & through On/off switch give the puls
X446,X456 :With data cable-3 select .cfg file not scat file
A101 : Plug in data cable-3 while pressing the volume + key in the phone
A110 : Plug in data cable-3, For, tool version is 6.1204 maui meta only
A90S,A90 : X11i cable

X234+ : Use X11i cable for Flashing, Press '1' key before insert cable for flashing o  write.
A25 : B Type Micro USB (SPAMOB3592) , no shortcut key, insert cable directly for software download.
X210+ : Flashing with Data cable-2, shortcut key for COM PORT making is Calling(green) key.
X350 : SPAMOB5762,For SW (Bl+white),
X269: Select cfg file in place of scatter,X11i flashing cable with Key press LSK
X325,X295,X286 : .cfg file in place of scatter file,LSK download key,with X11i cable & data cable-3 both.
A65 : Flashing With Data cable-3,Press Side Volume Down key before insert cable.
A65 :  with SPAMOB5761
Q76 : MTK flash tool, With Data cable-3 or B type cable, Center key is download key before connect cable for flashing.
X396 : MTK Flash tool, No need to press any download key, with Data cable-3 or B type cable.

P600 : Update with normal USB data cable-3, update procedure PDF & writing doc is available on FTP.
After update software, Press RESET button for 5 Second, then switch ON the tab,will take 3-4 minuts to boot first time.
Later on, normal use it.

A89: B type USB cable (SPAMOB3592), No shortcut key for download( Volume down for Data cable-3)

Q23 : Select .hqs file in place of scatter in multiport MTK flash tool, Press LSK(left soft key) before connect to Data cable-3 for flashing.

A54 : Software update with Memory card, copy zip software file in card(4GB), insert in phone,Press & Vol Up key+Power ON, apply update from SD card, update start.
tool is same like A57.

P550 : B type cable for Flashing, Open tool, select key & image file, press start on tool, press & hold Vol UP key & insert cable, then toggle Power ON key 4-5 times, Software update will automatically start.
After finish software, press all 3 side keys together and switch ON, it will reset the tab.
Now normal switch on the tab.

GC222/GC333 : Use Data cable-3/B type for flashing, press '1' no. key before insert cable for flashing.MTK Flash tool 5.1236

X340 : Normal USB data cable-3 or B type cable.No shortcut download key, Press download and insert cable.

X099 : Data cable-3 or B type cable for flashing, MTK Flash tool 5.1136 or latest, Press '2nd calling key' before insert cable for download.

X327 : Data cable-3 or B type cable for flashing, MTK Flash tool 5.1136 or latest, Press '2nd calling key' before insert cable for download.

A116 : Data cable-3 for Flashing & ,MTK tools,No download shortcut key,direct plug cable for SW or .Flash tool 3.1312.0.139

A88 : Data cable-3 for Flashing & ,MTK tools,No download shortcut key,direct plug cable for SW or

P360 : Funbook talk series,Flashing With B type & Data cable-3 both,Select img file in tool,press start,Continues press & hold
'Home' key on tab and connect cable,drivers automatic install,then press Yes-Yes and software will start,Battery should be >50% always.
Note : Ignore 'Device not found' error in tool,never press OK.

A115 : MTK tools, B type USB cable,X11i flashing cable can be used for Flashing, No download shortcut key,Direct plug cable for Flashing & 

A35/A27 : Run driver file 'DPInst.exe', Normal USB data cable-3 for flashing, Select Pac file,press play/start on tool, press Volume down key on phone(with battery>50%),Connect the cable,installation of drivers takes place automatically.
Then software auto start,

For  : Open  tool, connect phone with USB & switch ON, check 'DIAG'COM PORT in device manager,Select COM in tool,Write  on tool, press write, will successfully written.

P560 : Flashing thru SD card, Take 4 GB formatted SD card,Format internal storage of Tab too, now copy and paste zip file.
Press & hold Power+Volume down key,once tab starts vibrate,release Power key only and hold volume down same, Recovery mode will open on screen.
3rd option,Update from SD card,select file and start update.After success,restart tab.
For : Use A57,A87,A56 same 'Repair 3G tool' with normal data cable.

A62/A26 : Use cable SPAMOB5762(short external wires) for Flashing,first insert cable then battery and B-type Normal Micro USB(SPAMOB3592) cable for 

 For : Open I tool, Switch On phone and connect withn B type USB cable(SPAMOB3592), press 'Mode Sel' and 'Normal Mode', write 15 digit and press 'Write' on tool,
will shows green success, means done.
A72 : Use MTK super phone Flash tool 3.1244 for flashing, B type normal USB(SPAMOB3592), SN writer for 
X322 : (MT6250 chipset) Data cable-3 for flashing, Press Square key below LSK(left soft key) before insert cable for flashing, Maui meta tool for  writing.
A110Q/A88/A86/A92 : Flash tool 3.1312.0.139 or latest, Data cable-3, No shortcut download key for flashing, direct plug in cable, Maui Meta for 
A111 : Paste Software zip file to formatted 4 GB memory card, Press & hold Volume UP key and Power On key,
software automatically starts after showing Canvas animation.
For  : followm process given.

C260 : SW download version 3.8, Select Chipset QSC1110, Settings: click on 'Auto & extra restore',
Browse Software folder, press start download and connect data cable-2,USB cable, drivers installation and software will start.
MEID tool given specifically.

A51 : Install both drivers .exe files first.
Broadcom chipset download tool 'BrcmFlashTool_V2.0.7.0', Follow download procedure given, with battery, charge >50%.
  tool specific, Connect phone wothout battery and follow its proceure given.

X321 : Use SPAMOB5761 for flashing, Spreadtrum chipset flashing and  method,like X455.

A210/A240 : JB 4.2.1,Flash tool 3.1312.0.139 or latest, Data cable-3, No shortcut download key for flashing, direct plug in cable, Maui Meta for 

A113 : JB 4.1.3, Normal USB cable for flashing.
Step 1 : Press Volume down+Power key in Off condition, phone will come in download mode for flashing.
Step 2 : Open tool EMMC download tool V1.2.4 and click 'Download bootloader' option only.
Step 3 : Connect phone with PC and install drivers, Edit Com port number in tool.
Step 4 : Extract both zip software folders and copy paste other folders all files in 1 folder with name ''.
Step 5 : Select path of this folder now in tool and press download, after some time, it will show success, Done.
For  in A113 : tool given separately.

X328/X282 : Based on MT6260D chipset, Normal USB cable for flashing, Open tool and select flashing files, Press CSK(center soft key) before connect
cable for flashing.

Tab P650 : 3G Tab, JB 4.2.1, Based on MT 8389, 1.2GHz Quad core CPU.
Open tool , select files, Press Volume down key in off mode and connect normal usb cable for flashing.
  after flashing, dial *#3646633#*#* and select write  option, edit Imanually and save it, restart tab, now check  by *#06#

X351/X088/X084/X273 : Based on spreadtrum chipset, SC6531
Normal USB cable for flashing, open tool and select pac file, Press LSK(left soft key) before connect to PC for flashing.
Writing : If not able to make COM PORT, Dial *#64276#, Para set/Debug/Assert/Open and now connect USB cable.

Tablet PC Repairing Course

Duration:- 1 Months
Time:- 11 Hours Daily Period 9:00AM To 8:00PM

Course Fess :- (Total Fees Rs. 6,000/-)

Free In Course
 Books
 Tool Kits
 Multi Meter
 Software:----------
 Downloading Software for All Latest Mobile Like 6600,7610,3230,3250,
N70, N90, N80, N91, N93, N95, E60, E61 and Sony Ericsson, Motorola And
Samsung Mobile Software
 Unlocking Software
 Flashing Software
 All Type Converting Software
Jumper & Diagram CD & DVD

Course Details
Mobile Hardware & Software + Computer Hardware & Software Installation & Assembling + Networking +N Computing +CCTV Camera Installation + Tablet PC Repairing

Mobile Hardware:
Fundamentals of Mobile, Introduction of Basic Electronic, Difference
between all Mobile like Series 60, Series 60,3rd edition, Series 40,
Series 40,3rd edition, DTC3 Mobile, Communicator Series and other
Models, What is Resistance, Type of Resistance, Determining the value
of a Resistance, What is Capacitor, Transformer, Coil and Diode etc.
What is Diode Work, How we check Diode, Mobile Block Diagram Reading.

Fault Finding, Checking/Testing of Mobile with Multi Meter and How to
Change part of Mobile, Jumring of Mobile, Make Re bole IC, Repairing
of Mobile.
Introduction of Computer, What is Computer Assembling, Different Type
of Microprocessors, Motherboard & CPU Socket, Learn How to Assemble a
Computer With Different type part of Computer like SMPS, CPU, RAM, CD
Rom. Floppy Disk, Monitor, Modem, Mouse, Key Board, Microprocessor and
LAN Card etc. parts. Step by Step Computer Assembling & BIOS Setup

Mobile Software:-
 Downloading:- Deferent Type of Mobile like Nokia, Samsung, Sony
Ericsson, LG, Motorola, Fly, Chines Mobile, I-Pods, Mp4 etc.
 Unlocking:- How does Unlocking of Mobile like Nokia, Samsung, Sony
Ericsson, Motorola etc.
 Flashing:- How does Flashing of Mobile and in which condition you
have Flash any Mobile
 Converter:- How does converting any song’s for different type
Mobile, I-Pod and MP4, Different type of Converters are ( Smart Movie,
MMF, Wave Tone, MIDI to MMF, MP4, 3GP, AVI, RM to MP3, Video to Mp3,
Cutting Video and Mp3 Songs etc)
Computer Installation:-
What is Operating System, Booting Concepts & Operating System,
Partitioning, Windows 98 and Drivers Installation, Installation of
Office 2003, Pagemaker7 and Fonts Installation, Tally 4.5 &5.4,
Windows XP Visual Studio Installation, Macafee or Avast Anti Virus
Installation, Win Zip, Real Player, Acrobet Reader, Jet Audio
Installation and Installation of Mobile Converting Software and
Installation of Ufs3 Mobile Flashing Software

And Mobile Unlocking & Flashing Device Information and How Does Use it
Also Learn in Mobile Repairing Course

Device Detail Are

1. UFS HWK Original :- Supported Mobile Company
Sony Ericsson

2. SpiderMan Device :- Supported Mobile Company
All Chines Mobile Like Macromax,
Alkatel, Sigmatel, MP4,
Bluethooth, Musice Player, Chines
Nokia, Chines Samsung,
Chines Motorola, Chines Sony etc.

3. JAF Device:- Supported Mobile Company
All Latest Nokia Mobile Like Nokia
1200, 1202, 1203, 1207, 1208,
1209, 1650, 2600c, 3110c, 5200,
5300, 5700, 6300, 5210c, 6600c,
7210c, 1661, 1662, N95, N96, N97,
E60, E65, E70, E71, E80, etc.

4. MT Tool:- Supported Mobile Company
All Nokia Mobile it's Best for All
BB5 Mobile Like All Nokia N & E
Series Like N70, N72, N73, N80,
N81, N90, N92, N93, N95, N96,
N97, E60, E65, E70, E71, E80 etc......

5. SE Tool:- Supported Mobile Company
All Sony Ericsson Mobile

6. Z3X Box :- Supported Mobile Company
All Samsung Mobile

7. Infinity GSM Device:- Support More Than 928 Company And Support 5590 Model

8. Riff Box:- Support All Samsung HTC, CDMA etc Android Phone & Tablet PC Like HTC Flayer, Samsung Galexy Tab, Huawei, ZTE Tablet Supported

9. Infinity CDMA:- Support All CDMA Mobile Unlock & Flash

10. GPG Dragon:- Support ALl China Mobile

11. Volcano :- Support All Latest Chines Mobile

12. MSS Box :- Support All Motorola Mobile
Through of All Device You Have Unlock Mobile And Flash Mobile For Any
Software Problem


For More Information Continue Visit on More Use full Information Coming Soon. Wait For More New Information.
And Post Your Comments In All Post. Contact No +919411667220

A6, Govind Plaza, Lalkurti, Meerut Cantt. (UP) 250004


Bijendra Narsinghani

Post A Comment: