Intex Aqua Star HD Flashing With Miracle Box

Must Read:

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link

Intex Aqua Star HD firmware or flash tool download here

Required for flash:

1. Intex Aqua Star HD device with good battery charged

2. Intex Aqua Star HD firmware or flash tool (tested)

3. Miracle box (you can use other box)

4. Micro usb cable

5. Computer or Laptop

Procedure:

1. Take firmware or flash tool from above link (if link not working just write down comment on below comment box)

2. Extract to desktop or as you like path (must be installed winrar software in your computer or laptop)

3. Open Miracle box and go to MTK tab

4. Click on Write button

5. Choose correct boot option : 8th Boot(MT65xx & MT67xx/8127)

6. Click on Firmware button and choose MT6582_Android_scatter.txt file

7. Click on Start button

8. Press and hold Volume Up button and insert usb cable (must be working well device key or micro usb cable)

9. Wait until driver install, if driver installed in your computer or laptop then downloading automatically start in to device

10. Wait until full install android os (do not disconnect device while flashing process)

11. You are done