When i use this firmware then no any error or issue between flashing or this firmware or flash tested by me so please first read all tutorial after following and also remember must follow step by step so please remember all needed for this flash
This flash file tested by me without any error working well, you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.
1. Gionee P3 device with good battery charged please do no try with low battery otherwise your device will be dead or other issue 2. Gionee P3 tested firmware because if wrong version use for flashing then device will be also dead or other issue 3. SP Flash tool you can use other new also sp flash tool or use older sp flash tool 4. Micro usb cable this is impotent part of flashing because if micro usb cable not work then you can't flash it if micro usb cable not working then you can show message of usb not recognized or not detect device with computer or laptop 5. Computer or Laptop here must working well usb port if port not working then your device not detect with computer or laptop so last here most impotent need above mention.
1. Download tested firmware or flash tool from above link 2. Extract to desktop or as you like from winrar path (must installed winrar software in your computer or laptop) 3. Open SP Flash Tool 3.1352.01 folder and choose flash_tool.exe file open it, and click on Scatter-loading button and choose MT6582_Android_scatter.txt file from P3_0401_t6175 firmware folder 4. Click on Download button and Press and hold volume up button and Insert usb cable to device then wait until driver install in your computer or laptop if driver installed in your computer or laptop then downloading automatically start in to device then wait until full installed (note : do not disconnect while your device in flashing mode) Congratulation your device done from many problem.