A33, Govind Plaza,
Lalkurti, Meerut Cantt. (UP)
PIN: 250001
Contact No +919411667220



Xiaomi Redmi 1S Dead Recover Done With Flash Tool

Xiaomi Redmi 1S Dead Recover Done With Flash Tool
How to Recover Xiaomi Redmi 1S From Dead ? with Simple method (tested)
This method is simple to make for everyone who wants to dead recover using this method, within two days continue working on dead phone after recovery success, and also I had many experiences with device which all type error to not flashing on dead phone, here will any type flashing error solution, really I happy to solve this problem, first time device was going to fast boot mode when I try to flash and getting error after try device not starting phone was dead, I understand battery to be low but after full charged battery and insert in device try to start but nothing, after dead using dead recovery method but not to be flashing in one day constantly try on my personal computer but getting error, second use another computer there no any type error just choose option and flashing done.

About this method:

Before use, this method must read carefully all content after following step by step, because sometimes, not success in flashing, why ? cause not properly read, and in this post giving required which for dead recovery if any missing can't solve so first need to read all are content.

Here mention on requirement for this method, first must charge battery if can't flashing, must be working Micro USB Cable and use quality, stock ROM it's must be not corrupted (note : if any error when you try to extract then not use stock ROM), must be installed USB driver in your computer this also in required without it you can't connect, must be working well device USB socket which connect for flashing after connect there not to be error like USB not recognized, computer or laptop there also must be working well USB port or also must be installed USB driver which computer or laptop's driver is different between device or computer.




Bijendra Narsinghani

Post A Comment: