How to Use SP Flash Tool:Step 1: Install drivers on your PC (If you feel any problem in install driver then watch this video) and Enable Developer Mode and USB Debugging on your Phone by this guide. After then switch off your phone.
Step 2: Extract Stock ROM and SP Flash Tool folder, where you want to save. Open the SP Tool and run Sptool.exe as Administrator.
Step 3: Click on Scatter-Loading option. SP Flash Tool ask you the location of the scatter file in your PC. You will find it in the extracted Stock ROM folder. Now go to the Rom folder and select the file “Android_scatter_emmc.txt” which is your stock Rom scatter file.
Step 4: Now Select firmware upgrade from drop-down menu then click on Download. And Connect your switch off phone with The PC via USB cable (Make sure your phone is switched off).
Step 5: SP Tool auto-detect your phone and process will start. If Sp Flash tool is not recognize or detect your phone then install vcom driver. After install Vcom driver reconnect your switched off phone with the PC. If you phone again not recognized by your SP Flash Tool then try to flash via Meta mode flashing process, here is Meta-Mode flashing guide.
Note: Don’t interrupt this process as it can potentially brick your device. Make sure no power interruption takes place.
Step 6: Now start downloading Stock Rom in your phone by flashing. After the process complete, a green ring will appear. Now disconnect your updated Smartphone. If you feel any problem of flashing or update your phone then watch this video.
Must Read: Top 5 Mobile Apps – Boost speed of Android Smartphone
I hope you like this SP Tool and you can easily install or flash ROM and custom recovery on your Android device. If feel any problem in this guide then please use comment box. Thanks to all.
Post A Comment: