Intex Aqua S3 Stock Firmware ROM (Flash File)

Intex Aqua S3 Stock Firmware ROM (Flash File) download for your Intex Android Smartphone. Included contains Flash Tool, USB Driver, and how-to Flash manual instructions. The Intex Aqua S3 running on Android v7.0 Nougat version which is manufactured by Spreadtrum SC9832 CPU. Use SPD Upgrade Tool for flash Firmware on this device.

Download Intex Aqua S3 Firmware (Flash File)

Build Number: INTEX_AQUA_S3_V05_Indian
Android Version: v7.0 (Nougat)
Download Size: 1.2 GB

Download

Build Number: INTEX_AQUA_S3_V06_Indian_SER
Android Version: v7.0 (Nougat)
Download Size: 1.2 GB

Download

Build Number: INTEX_AQUA_S3_V07_NST_Indian
Android Version: v7.0 (Nougat)
Download Size: 1.2 GB

Download

Build Number: INTEX_AQUA_S3_V08_Indian
Android Version: v7.0 (Nougat)
Download Size: 1.2 GB

Download

Build Number: INTEX_AQUA_S3_V12_Indian_SER
Android Version: v7.0 (Nougat)
Download Size: 1.1 GB

Download

How To Flash Intex Aqua S3 Firmware

Step 1: Download and extract Intex Aqua S3 flash file on your Computer.

Step 2: Install SPD Android USB Driver (skip if already installed).

Step 3: Open SPD Flash Tool and select the .pac Firmware file using Load Packet interface.

Step 4: Now click on Start Downloading button in Flash Tool.

Step 5: Connect the device to Computer using USB by pressing Volume Up or Down button.

Step 6: Now wait until during the flashing process after done you will see passed message.