Micromax Q346 Stock Firmware ROM (Flash File)

Micromax Q346 Stock Firmware ROM (Flash File) download for your Micromax Android Smartphone. Included contains Flash Tool, USB Driver, and how-to Flash manual instructions. Micromax Q346 running on Android v5.0 Lollipop version which is manufactured by Spreadtrum SC7731 CPU. Use SPD Upgrade Tool for flash Firmware on this device.

Download Micromax Q346 Firmware (Flash File)

Software Version: V1_14-01-16
Android Version: v5.0 (Lollipop)
Download Size: 733 MB

Download

Build Number: MMX_Q346_SW_V009_HW_V2.0_20160114
Android Version: v5.0 (Lollipop)
Download Size: 735 MB

Download

Build Number: MMX_Q346_SW_V018_HW_V2.0_20160830
Android Version: v5.0 (Lollipop)
Download Size: 696 MB

Download

Build Number: MMX_Q346_SW_V001_HW_V2.1_20160616
Android Version: v6.0 (Marshmallow)
Download Size: 729 MB

Download

Build Number: MMX_Q346_SW_V002_HW_V2.1_20160621
Android Version: v6.0 (Marshmallow)
Download Size: 758 MB
File Extracting Password: firmwarefile.com

Download

Build Number: MMX_Q346_SW_V003_HW_V2.1_20160812
Android Version: v6.0 (Marshmallow)
Download Size: 758 MB

Download

How To Flash Micromax Q346 Firmware

Step 1: Download and extract Micromax Q346 flash file on your Computer. After that, you will find SC7731 .pac Firmware inside the folder. Now open SPD Upgrade Tool and click on Load Packet button then select the .pac Firmware file.

Step 2: Install SPD Android USB Driver on your Computer (skip it if the driver already installed). Now click on Start Downloading button in Flash Tool for begin the flashing process and connect your device to the Computer using USB cable by hold pressing Volume Up or Down button in power off mode.

Step 3: Wait until during the downloading process at this time don’t disconnect your device from Computer. It can take up to 5-10 minutes for completed. After done you will see a Passed message in Flash Tool.