Micromax Q380N Stock Firmware ROM (Flash File)

Micromax Q380N Stock Firmware ROM (Flash File) download for your Micromax Android phone. Included contains Flash Tool, USB Driver, and how-to Flash manual instructions. The Micromax Q380N running on Android v5.1 Lollipop version which is manufactured by Spreadtrum CPU. Use SPD Upgrade Tool for flash Firmware on this device.

Download Micromax Q380N Firmware (Flash File)

Build Number: MMX_Q380N_SW_V0.0.H_HW_V1.0.0_140116
Android Version: v5.0 (Lollipop)
Download Size: 1018 MB

Download

How To Flash Micromax Q380N Firmware

Step 1: Download and extract Micromax Q380N flash file on your Computer. After that, you will find .pac Firmware inside the folder. Now open SPD Flash Tool and click on Load Packet button then select the .pac Firmware file.

Step 2: Install SPD Android USB Driver on your Computer (skip it if the driver already installed). Now click on Start Downloading button in Flash Tool for begin the flashing process and connect your device to the Computer using USB cable by hold pressing Volume Up or Down button in power off mode.

Step 3: Wait until during the downloading process at this time don’t disconnect your device from Computer. It can take up to 5-10 minutes for completed. After done you will see a Passed message in Flash Tool.