Micromax Q382 Stock Firmware ROM (Flash File)

Micromax Q382 Stock Firmware ROM (Flash File) download for your Micromax Android phone. Included contains Flash Tool, USB Driver, and how-to Flash manual instructions. Micromax Q382 running on Android v5.1 Lollipop version which is manufactured by Spreadtrum SC7731G CPU. Use SPD Upgrade Tool for flash Firmware on this device.

Download Micromax Q382 Firmware (Flash File)

Software Version: MMX_Q382_SW_V8.0.8_HW_V1.0.0_101215
Android Version: v5.1 (Lollipop)
Download Size: 954 MB

Download

How To Flash Micromax Q382 Firmware

Step 1: Download and extract Micromax Q382 flash file on your Computer. After that, you will find SC7731 .pac Firmware inside the folder. Now open SPD Flash Tool and click on Load Packet button in Flash Tool then select the .pac Firmware file.

Step 2: Install SPD Android USB Driver on your Computer (skip it if the driver already installed). Now click on Start Downloading button in Flash Tool for begin the flashing process and connect your device to the Computer using USB cable by hold pressing Volume Up or Down button in power off mode.

Step 3: Wait until during the downloading process at this time don’t disconnect your device from Computer. It can take up to 5-10 minutes for completed. After done you will see a Passed message in Flash Tool.