Micromax Q397 Stock Firmware ROM (Flash File)

Micromax Q397 Stock Firmware ROM (Flash File) download for your Micromax Android phone. Included contains Flash Tool, USB Driver, and how-to Flash manual instructions. The Micromax Q397 running on Android v6.0 Marshmallow version which is manufactured by Spreadtrum SC7731 CPU. Use SPD Upgrade Tool for flash Firmware on this device.

Download Micromax Q397 Firmware (Flash File)

Build Number: MMX_Q397_SW_V001_HW_V1.0_20160523
Android Version: v6.0 (Marshmallow)
Download Size: 383 MB
File Extracting Password: firmwarefile.com

Download

Build Number: MMX_Q397_SW_V003_HW_V6.0_20160802
Android Version: v6.0 (Marshmallow)
Download Size: 1.59 GB

Download

How To Flash Micromax Q397 Firmware

Step 1: Download and extract Micromax Q397 flash file on your Computer. After that, you will find .pac Firmware inside the folder. Now open SPD Flash Tool and click on Load Packet button in Flash Tool then select the .pac Firmware file.

Step 2: Install SPD Android USB Driver on your Computer (skip it if the driver already installed). Now click on Start Downloading button in Flash Tool for begin the flashing process and connect your device to the Computer using USB cable by hold pressing Volume Up or Down button in power off mode.

Step 3: Wait until during the downloading process at this time don’t disconnect your device from Computer. It can take up to 5-10 minutes for completed. After done you will see a Passed message in Flash Tool.