Tecno Pop 2 B1 Flash File And Tool [Stock ROM] & Method

Tecno Pop 2 B1 Flash File And Tool [Stock ROM] are available to download. If you are user of Tecno Pop 2 B1 and now getting any software related problem on the device then download Tecno Pop 2 B1flash file or Tecno Pop 2 B1  firmware from below download section

Here we will guide on how to download and install Stock ROM on Tecno Pop 2 B1. The guide is simple and easy!

Alright, so it looks like that you are someone who is using a Tecno Pop 2 B1. Great! Tecno Pop 2 B1 makes some of the best budget Android Devices. The device is running under the MediaTek Chipset. But, there is nothing in this world which is perfect, Right? Sometimes things do not go too well with Android Devices. It looks like that you are also facing some issue on your Tecno Pop 2 B1.

Download Tecno Pop 2 B1 Flash File

If you facing any lag of your device, network issue, Screen freezing, unresponsive Touch and camera fail or any software related problem then you can download the Stock ROM or stock firmware for Tecno Pop 2 B1. By installing this stock firmware you can solve Screen freezing, boot loop other software related issues. Also, you can use this firmware to unbrick Tecno Pop 2 B1. Stock firmware doesn’t void the warranty of your device. The Tecno Pop 2 B1 Stock Firmware is now available for all regions with play store. So let’s go the instruction to download the Firmware.

Download Tecno Pop 2 B1 Firmware

Flash File

B1-F8018BC-GO-181117V124 
B1-F8018D-GO-181114V70 
Flash Tool – Tecno Flash Tool
Driver – MTK_USB_All_v1.0.8.zip

The Advantage of Stock Firmware

• Flash Stock To Unbrick your Tecno Pop 2 B1.
• Flash Stock ROM to Fix the boot loop problem
• Upgrade and Downgrade Tecno Pop 2 B1
• Unroot or Fix Bugs on your phone
• To fix the lag or stutter on Tecno Pop 2 B1.
• By flashing Stock ROM, you can solve software problems.
• Revert back to stock to gain your warranty.

How to Install Stock ROM on Tecno Pop 2 B1 Using Tecno Tool:

If you are stuck at FRP, Flashing will Remove FRP.

1– Download & Unzip Tecno Flash tool Folder. Run SWD_AfterSales.

2- It will launch Tecno Flash Tool.

3- Click on Setting then on Load, Choose Firmware and Click on Confirm.

4- Click on Play Button. Switch off Phone & Connect it by Pressing Both Volume keys.

5- Flashing will Start.

Note: The first time it takes 5-10 minutes to boot.