Lava Z80 FRP Unlock Without Box -Lava Z80 FRP File

Lava Z80 FRP Unlock Without Box -Lava Z80 FRP File

hello guys, once again we are here with another FRP bypass tutorial. Today we are going to takabout Lava Z80 FRP unlock trick 2019. For this Lava Z80 FRP bypass, no need to use any professional tool like UMT dongle, Miracle Tool etc. That means we will remove Lava Z80 FRP without any box

Here in this guide, we are going to use free SP flash tool as a Lava Z80 FRP tool and Lava Z80 FRP file. We tested this method on Lava Z80 android Nougat with latest security patch level. So if you are one of them who want to unlock pattern lock or PIN lock of Lava Z80 then format the device from recovery mode. It will unlock all screen lock of the device easily. But problem is that if you were using any Google account on the same device, it will stuck on Google account verification screen. It’s called FRP lock developed by Google to secure your device form third person.

So in case, you have the same FRP lock issue on Lava Z61 nougat mobile, follow the below guide and unlock Lava Z80 factory reset protection or Lava Z80 Google account verification without box. No need to flash firmware or no need to use any premium tool. Simple Lava FRp file and sp flash tool is enough to unlock Lava Z80 after reset.About: Lava Z80 FRP Unlock Without Box

Brand: Lava Z80

OS: Android Nougat [Latest Security Patch Level]

FRP Tool: Sp flash tool as a Lava Z80 frp removal tool

Unlock Lava Z80 FRP Lock With Sp Flash Tool

As we already told you, no need to buy or use any profession flash tool to bypass Lava Z80 frp lock. Download latest sp flash tool and Lava Z80 FRP file from below download section and follow the below guide as it is as shown below.{Please Note:Some users report that they are getting “tool DL image fail error” after reset FRP on lava z80 by sp flash tool. So read the post carefully because we will also tell you how to fix tool DL image fail error in Lava Z80 mobile?”]

Pre-Requirements To Unlock Lava Z80 FRP Lock With Sp Flash Tool

• Charge the device approx. 80% to prevent accidental power off in between the frp reset procedure.
• USB cable & Pc / Laptop.
• Make sure you have “Google account verification problem” or “FRP lock” .

Download Lava Z61 FRP Tool, Drivers and Lava Z61 FRP Reset File

 Lava Z80 FRP Bypass Tool [SP Flash Tool] : DOWNLOAD

Lava Z80 FRp Reset File : DOWNLOAD 01 / DOWNLOAD 02 / MIRROR

Lava Z80 USB Divers [VCOM Driver] : DOWNLOAD

Lets Start Bypass FRP Lava Z80:

-Extract “SP Flash Tool” & also extract “Scatter file” on your desktop.

-Run as administrator “SP Flash Tool”.

-Go to “DOWNLOAD” tab.

Once the tool launch, click on “Choose” button” under the “Download-Agent” section and load “DA_SWSEC.bin” file from “Lava Z80 FRP reset file” folder as shown below.

Next click on “Choose” button under the “Scatter-loading file” section and load “MT6737M_Android_scatter.txt” file from “Lava Z80 FRP reset file” folder as shown below.

-Now go to “Format” tab.

-Select “Manual Format Flash”.

-Give Below in both box.

Begin Address[HEX]:0x6a00000
Format Length[HEX]:0x100000

-Switch off your Lava Z80 device.

-While pressing (Volume Down) key, connect your USB Cable to computer.

Note: Make sure, you are connecting your device to computer while pressing volume down key, and keep pressing key for few more second after you

connect to computer.

-Now click on “START” button from sp flash tool to Bypass FRP Lava Z80.

Remember: If you are getting an error while flashing your device, so you can try by giving other scatter file, we pasted here 2 scatter file, you can try with both.

-Once flashing process finish, congrats you have done to Bypass FRP Lava Z80.

-Now we need complete initial setup in our device.

Thanks for reading with us, and i hope this method worked with your Lava Z80, don’t forget to ask us anything regarding this m

IMPORTANT: If you are getting “tool DL image fail error” after reset frp by following above method, please continue the steps again as shown below.

• Again go to main section and click check mark on “Cache” option only and untick everything.

• Finally hit on “DOWNLOAD” button from the tool.