LYF Jio F10Q Tested Flash File And Tool | Hang On Logo | Auto Restart Solution LYF Jio F10Q Tested Flash File And Tool | Hang On Logo | Auto Restart Solution 27 April Bijendra Narsinghani Share To: LYF Jio F10Q Tested Flash File And Tool | Hang On Logo | Auto Restart Solution If you are searching LYF Jio F10Q Tested and working flash file and tool your LYF Jio F10Q hang on the logo auto restart problem If yes then you have landed on right place. Today, we are here with official software of Jio F10Q keypad mobile. Download LYF Jio F10Q Flash File, Tool & Drivers LYF Jio F10Q Flash File Download Free – DOWNLOAD LYF Jio F10Q USB Drivers – DOWNLOAD LYF Jio F10Q Flash tool [QPST Tool] – DOWNLOAD Boot Key Of LYFJio F10Q? In simple words, the boot key is a key which accesses a device driver to install firmware on the mobile phone. The boot key of LYF Jio F10Q is the UP button. the step of pressing boot key turn off your mobile and remove the battery and reinsert. press and hold the select button and insert the USB cable thought mobile to pc. The flashing process begins then release the select button. How to Flash LYF Jio F10Q: 1- Download LYF F10Q Flash file which consists of File, tool & Driver.2- Install Driver3- Connect Phone in ON mode to cross-check driver installation. It will make port named “Qualcomm HS-USB Diagnostics 9008”4- It means driver has been installed successfully.5- Install Flash Tool, which will install the shortcut on Desktop named QFLASH Tool.6- Connect phone (Press Up key)& Click on Load Content and from Flash File Folder select Content.xml7- It will show Port in the tool.8- Click on Download Content to start Upgrading.9- Wait till done appears.10- After upgradation, the device will shift to download mode.11- Disconnect Phone & reinsert the battery.