IMET

A33, Govind Plaza,
Lalkurti, Meerut Cantt. (UP)
PIN: 250001
Contact No +919411667220

Email:
bijendra.narsinghani@gmail.com

Website:
Navigation

Samsung Galaxy SM-J500H Battery Pin Jumper Point Ways

Samsung Galaxy SM-J500H Battery Pin Jumper Point Ways
Samsung Galaxy J5 J500H Battery Connector Ways Problem Jumper

If your Samsung Galaxy J5 SM-J500H Battery Connector is damaged somehow by whether mishandling or any other reason you can always replace it with a new one. But if you have damaged the battery Connector prints meaning Connection points on which The Battery Connector is soldered to the Samsung SM-J500H Battery Connector Ways PCB motherboard no need to worry, Diagrams on the end of this article can help you.
In this post you will find solution for damaged Samsung J500H battery connector. Battery connectors in these phones are soldered on to the motherboard and some times get damaged if the mobile phone is mishandled.


The very first thing that you need to do is to check battery voltage at its terminals in order to verify whether the problem is with the battery or with anything else. (Battery voltage should be at least 3.8V).
If the battery voltage is lower than 3.8V or is not showing charge then it means you need to change your battery in first place and check.Now check battery connectors physically for any physical or water damage. In case it is water damage than clean the battery contacts. Besides that, also re-solder these battery contacts and make jumpers.
In case all of the above method doesn’t resolve your problem then check the entire board for any traces of water damage gently heat or re-solder if needed.
Samsung Galaxy SM-J500H Battery Terminal, Battery Points, Battery Jack Problem, Battery Terminal Solution, Battery Terminal Jumpers, Battery Power Ways

Share
Banner

Bijendra Narsinghani

Post A Comment: