Blackberry Z10 Charging Problem Solution Usb Ways Jumper
Blackberry Z10 Charging Solution Jumper Problem Ways Charging Not Supported
Charging problem in Blackberry Z10 is really not a common one, but when it happens you really know that you are going to have a very bad time! Samsung SM-J110M Charging problem can occur due to any of the reasons; it could either be due to water damage or physical damage.
Reasons of Problems
Charging connector’s pins might be damaged, corrosive or dusty.
Charger is out of order or is not original. Battery might be faulty or copy.
Battery terminals might be corrosive or damaged.
To fix the problem, you may first ensure that the wall charger you are using is properly working and the battery is not totally drained. Continue by checking the charging pin connector or DC jack connector, visually check it for possible damaged. Clean the PCB board charging pads and battery connector. If the problem still occurs proceed to components troubleshooting.
If the procedures above doesn’t solved the charging problem, the possible faulty is the power IC. Rework or replace if necessary.
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Blackberry Z10 Charging,Solution,Jumper,Problem,Ways
Blackberry Z10 Charging Solution Jumper Problem Ways No Charging Not Supported
Blackberry Z10 Charging Solution Jumper Problem Ways Charging Not Supported
Charging problem in Blackberry Z10 is really not a common one, but when it happens you really know that you are going to have a very bad time! Samsung SM-J110M Charging problem can occur due to any of the reasons; it could either be due to water damage or physical damage.
Reasons of Problems
Charging connector’s pins might be damaged, corrosive or dusty.
Charger is out of order or is not original. Battery might be faulty or copy.
Battery terminals might be corrosive or damaged.
To fix the problem, you may first ensure that the wall charger you are using is properly working and the battery is not totally drained. Continue by checking the charging pin connector or DC jack connector, visually check it for possible damaged. Clean the PCB board charging pads and battery connector. If the problem still occurs proceed to components troubleshooting.
If the procedures above doesn’t solved the charging problem, the possible faulty is the power IC. Rework or replace if necessary.
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Blackberry Z10 Charging,Solution,Jumper,Problem,Ways
Blackberry Z10 Charging Solution Jumper Problem Ways No Charging Not Supported
Post A Comment: