Tecno KB3- Camon iSky 3 Flash File Tool Driver & Flashing Method

Tecno KB3 Tested Flash File And Tool [Tecno KB3 FRP Bypass]

Download Tecno KB3 Firmware

Flash File – 

Flash Tool – 

  

Driver –

The Advantage of Stock Firmware

• Flash Stock ROM to Fix the boot loop problem
• Flash Stock To Unbrick your Tecno KB3.
• Unroot or Fix Bugs on your phone
• Upgrade and Downgrade Tecno Tecno KB3
• By flashing Stock ROM, you can solve software problems.
• To fix the lag or stutter on Tecno Tecno KB3.
• Revert back to stock to gain your warranty.

How to Flash Tecno KB3- Camon iSky 3 Using Tecno Tool:

If you are stuck at FRP, Flashing will Remove FRP.

1– Download & Unzip Tecno Flash tool Folder. Run SWD_AfterSales.

2- It will launch Tecno Flash Tool.

3- Click on Setting then on Load, Choose Firmware and Click on Confirm.

4- Click on Play Button. Switch off Phone & Connect it by Pressing Both Volume keys.

5- Flashing will Start.

Note: The first time it takes 5-10 minutes to boot.

How To Flash Tecno KB3- Camon iSky 3 Using SP Flash Tool:

• Download Tool, Driver, Firmware
• Then extract firmware.zip, Tool, driver.
• Now install USB drivers.
• After that open the Smart Phone Flash tool (flash_tool.exe).
• Then click the Scatter-loading button and browse and select the extracted firmware [MT6737M_Android_scatter.txt] file which you have already downloaded.
• Now hit the download button.
• Switch off your phone and connect your phone to the PC by pressing vol down key.
• After the flashing, a green tick will appear.
• Disconnect your phone and turn it on.

Note: The first time it takes 5-10 minutes to boot.