Medusa Box v1.1.7 is out! We have added FREE UNLOCKING of Sony Ericsson XPERIA X10 (no server, no credits, no queues, no limits) and boot repair for Samsung SCH-W920, SCH-W930, SPH-W3500 and Sony Ericsson U20i!
Medusa Box v.1.1.7 Release Notes:
Added support for the following phone models:
To unlock Sony Ericsson XPERIA X10, perform the following steps:
To resurrect these devices perform the following steps:
Medusa Box v.1.1.7 Release Notes:
Added support for the following phone models:
- Sony Ericsson XPERIA X10 – Added Unlock via TP.
- Sony Ericsson U20i – Added Dead Boot Repair.
- Samsung SCH-W920 – Added Dead Boot Repair.
- Samsung SCH-W930 – Added Dead Boot Repair.
- Samsung SCH-W3500 – Added Dead Boot Repair.
To unlock Sony Ericsson XPERIA X10, perform the following steps:
- Solder JTAG cable to JTAG testpoints as explained in manual.
- Make sure that correct model has been selected from model list.
- Set Jtag speed to "Auto" (RTCK).
- Select "Advanced" mode.
- Press "Connect" button and wait till device will be connected.
- Press "Unlock" button.
- After operation is successfully finished verify that device was successfully unlocked.
- Desolder JTAG wires.
To resurrect these devices perform the following steps:
- Solder JTAG cable to JTAG testpoints as explained in manual.
- Make sure that correct model has been selected from model list.
- Set Jtag speed to "Auto" (RTCK).
- Select the "EasyRepair" mode.
- Press the "EasyRepair" button and follow Wizard instructions.
- After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
- Desolder JTAG wires.
Software
Medusa Software Installer 1.1.7 Sony Ericsson X10, U20i, Samsung SCH-W920, SCH-W930, SCH-W3500 2011-08-23 | 87.01 MB |
User Manual
User manual 2011-03-15 | 440 KB |
Post A Comment:
0 comments: