Vivo Y71 Firmware Flash File Stock ROM & Flashing Method

 

The materials do flashing Vivo Y71

• Download Qfill
• Download firmware Vivo Y71
• Download USB Driver
• PC or laptop
• USB cable ( I recommend using the built-in USB cable of Vivo Y71 smartphone )

Steps to flashing Vivo Y71

• Install USB driver to your pc or laptop ( this step you can skip if smartphone is detected by your computer )

• Extract the firmware according to your smartphone type (put one folder, so it will be nice to look for it later)

• Download Qfill / QPST.WIN.2.7 Installer-00429 to complete ( follow suggested instructions )

• And you go to Qfill by going to> Start> All program> Qfill> Open . as shown below.

• Then Click "Flat Build"

• And Click "Browse .." Look for the file named "prog_emmc_firehose_8909.mbn" in the extracted firmware folder,

• After that Click "Load xml" then click file "rawprogram_unsparse" and click again file "patch0"

• Turn off the smartphone is still alive, until it is true Of.

• Connect the smartphone to your PC / Laptop, at the same time you press "Volume UP" Volume Down " button until open " Download " button then click.

• Wait until the prose flasing takes place which is marked with a blue bar running slowly.

• If the flashing process is finished its usual smartpharone will conserve itself, and marked with "Download succeed" . examples such as the following.

• Unplug the smartphone Vivo Y71 from your PC / Laptop and can directly turn on by pressing the power button for 5-10 seconds,

• Usually booting the first time Vivo Y71 smartphone takes 10-15 seconds.

• Completed .....