Realme 3 Pro Flash File And Tool [Stock Rom] Remove User Lock

Realme 3 Pro Flash File And Tool [Stock Rom] Remove User Lock

Download Realme 3 Pro Flash File And Tool

RMX1851_11_A.12_190423_abecd1fa 

Guide To Flash Realme 3 Pro With MSM Download Tool

• Driver: QDLoader_HS-USB_Driver.rar
• Activate tool: OPPO_ALL_TOOL.rar

• Download and extract the downloaded Realme 3 Pro flash file in any folder.
• Enter into the extracted folder and run “MSMDownload Tool.exe” as administrator. Here you need to log in with correct username & password. Otherwise, you can’t continue the flashing process. 

• [Use the premium version of MSMDownload tool or Do Google to activate MSMdownload tool without username & password]

  • Once the tool launch successfully, clicks on “Start All” button to load all firmware files.
  • In next step, tool will verify for PC Memory Checksum. Here it may take a couple of minutes.
  • Now come to the device and connect the device with pc via USB cable + pressing the boot key.
  Realme 3 Pro Boot Key: Boot key may be different for different devices. So do Google to find the correct boot key of the device. Most of the all Qualcomm chipset based devices boot key is — power off >> press & hold volume down key + volume up key + insert the USB cable.
  If the device is properly connected with pc, it will create “Qualcomm HS-USB QDLoader 9008 port” under the “device manager”.
  

• Once the tool detect the device in “ELD Mode” or “Emergency Download mode” or “Qualcomm HS-USB QDLoader 9008 port” flashing process will start automatically.
• Wait to flash mobile and then setup it again as a new device.
• Done!!!