Tecno i5 Flash File [Stock Firmware] – How To Flash Tecno i5 Tecno i5 Flash File [Stock Firmware] – How To Flash Tecno i5 24 June Bijendra Narsinghani Share To: Tecno i5 Flash File [Stock Firmware] – How To Flash Tecno i5 Download Tecno i5 Firmware Flash File Tecno I5-H379B1-N-IN-190416V241 Flash Tool – Tecno Flash Tool Driver – MTK_USB_All_v1.0.8.zip Password=GD_Mekail92/Gsm Developers-I5 The Advantage of Stock Firmware Flash Stock To Unbrick your Tecno i5 Flash Stock ROM to Fix the boot loop problem Upgrade and Downgrade Tecno i5 Unroot or Fix Bugs on your phone To fix the lag or stutter on Tecno i5 By flashing Stock ROM, you can solve software problems. Revert back to stock to gain your warranty. How to Flash Tecno i5 Using Tecno Tool: If you are stuck at FRP, Flashing will Remove FRP. 1– Download & Unzip Tecno Flash tool Folder. Run SWD_AfterSales. 2- It will launch Tecno Flash Tool. 3- Click on Setting then on Load, Choose Firmware and Click on Confirm. 4- Click on Play Button. Switch off Phone & Connect it by Pressing Both Volume keys. 5- Flashing will Start. Note: The first time it takes 5-10 minutes to boot. How To Flash Tecno i5 Using SP Flash Tool: Download Tool, Driver, Firmware Then extract firmware.zip, Tool, driver. Now install USB drivers. After that open the Smart Phone Flash tool (flash_tool.exe). Then click the Scatter-loading button and browse and select the extracted firmware [MT6737M_Android_scatter.txt] file which you have already downloaded. Now hit the download button. Switch off your phone and connect your phone to the PC by pressing vol down key. After the flashing, a green tick will appear. Disconnect your phone and turn it on. Note: The first time it takes 5-10 minutes to boot.