Tecno i3 Flash File [Stock Firmware] – How To Flash Tecno i3 Tecno i3 Flash File [Stock Firmware] – How To Flash Tecno i3 24 June Bijendra Narsinghani Share To: Tecno i3 Flash File [Stock Firmware] – How To Flash Tecno i3 Download Tecno i3 Firmware Flash File Tecno i3-H375C1-N-IN-190314V315 Flash Tool – Tecno Flash Tool Driver – MTK_USB_All_v1.0.8.zip Password: GD_Mekail92/Tecno I3 The Advantage of Stock Firmware Flash Stock To Unbrick your Tecno i3 Flash Stock ROM to Fix the boot loop problem Upgrade and Downgrade Tecno i3 Unroot or Fix Bugs on your phone To fix the lag or stutter on Tecno i3 By flashing Stock ROM, you can solve software problems. Revert back to stock to gain your warranty. How to Flash Tecno i3 Using Tecno Tool: If you are stuck at FRP, Flashing will Remove FRP. 1– Download & Unzip Tecno Flash tool Folder. Run SWD_AfterSales. 2- It will launch Tecno Flash Tool. 3- Click on Setting then on Load, Choose Firmware and Click on Confirm. 4- Click on Play Button. Switch off Phone & Connect it by Pressing Both Volume keys. 5- Flashing will Start. Note: The first time it takes 5-10 minutes to boot. How To Flash Tecno i3 Using SP Flash Tool: Download Tool, Driver, Firmware Then extract firmware.zip, Tool, driver. Now install USB drivers. After that open the Smart Phone Flash tool (flash_tool.exe). Then click the Scatter-loading button and browse and select the extracted firmware [MT6737M_Android_scatter.txt] file which you have already downloaded. Now hit the download button. Switch off your phone and connect your phone to the PC by pressing vol down key. After the flashing, a green tick will appear. Disconnect your phone and turn it on. Note: The first time it takes 5-10 minutes to boot.
Post A Comment:
0 comments: