May 12, 2016

Intex Aqua Glam Hang on Logo Flashing

Intex Aqua Glam Hang on Logo or Flash done with SP Flash tool (tested)
 

This flash file tested by me without any error working well,  you can use this flash file when your device hangs on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro USB cable if not good then you can't flash it so check micro USB cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Requirement:

1. Intex Aqua Glam handset

2. Intex Aqua Glam Stock Rom Firmware

3. Intex Aqua Glam Flash tool

4. Intex Aqua Glam USB Driver

5. Micro USB cable

6. Computer or Laptop

Method:

1. Download requirement from above link (if link dead just leave your comment)

2. Unzip file from WinZip to desktop or as you like path (must be installed WinRAR)

3. Open SP Flash tool folder and choose flash_tool.exe file and open it

4. Click on Scatter-loading button and choose MT6580_Android_scatter.txt file

5. Wait until stock ROM firmware checksum process

6. Now click on Download button

7. Attach USB Cable into device (if not detect device then Press and hold Volume Up button)

8. Wait until driver installing automatically if not installed driver just update from above link driver

9. After detect device start process automatically and wait until full process

10. Do not disconnect while device in flashing mode

11. Congratulation I wish you are done


No comments:

Post a Comment