A33, Govind Plaza,
Lalkurti, Meerut Cantt. (UP)
PIN: 250001
Contact No +919411667220



Nokia 108 Usb Pinout Ways For Flashing

Nokia 108 Usb Pinout Ways For Flashing
How To Flash Nokia 108 Usb Cable Jumper
Nokia 108 Usb Cable Pinout Ways For Flashing
Here we would like to share the information with you all about how easy to root or flashing Nokia 108. Take a USB Data Cable And Cut It Head Side, Then You Find 4 Different Cable. You Need Solder It Like Bellow Picture.

The main pinout is see picture below, see which wire connect to which point on set, just match it & enjoy Nokia 108 USB flashing.
If you are new & want to flash this way then First cut any usb cable that you want to use for USB flashing.
Now follow the procedure…..(This procedure is for all)

Trick Jumper Pinout USB Cable Directly to the Phone Board
Attach the USB cable directly to the phone such as the picture above board. NOTE : make sure the jumper cables are not connected to each other, this will result in your computer cannot identify the mobile
Connect phone to your computer via USB
Select firmware Rm-1011, Nokia adjust the version you are using
Put the firmware such as MCU, PPM, CNT. If you do not have please search first provider of firmware free on google.
When all is done just the way you are right flashing.
Tips and Warning
If you enter the wrong firmware will cause the phone to Local Mode. because I never experienced a firmware error and phone to local mode


Bijendra Narsinghani

Post A Comment: