A33, Govind Plaza,
Lalkurti, Meerut Cantt. (UP)
PIN: 250001
Contact No +919411667220



Xolo A700S Hang on logo Restarting Problem Solve

Xolo A700S Hang on logo Restarting Problem Solve, Xolo A700S Flashing, How to Flash Xolo A700S, Xolo A700S Flash File, Xolo A700S Fimware
If any type problem is in the software related in Xolo A700S model you can use this method and many to be kinds of software problem like hang on logo this problem when you many apk installed in your devices while such problems may be coming not only hang on logo but restarting problem and you can use this when device in pattern lock when you try to repeat draw pattern lock then your device will be asking enter your correct gmail id or password and for this must be internet enabled when you have not option to turn on option use this but remember before use this must take backup if your device live if do not do this it might leave your entire data which one contacts, photos, videos, notes, emails etc.

If you want to use this method must be working well of all impotent which first of usb socket in device, micro usb cable, usb driver, stock rom not to be bad and also working well flash tool because these are impotent for this solve i suggest you first read carefully read all are content before following some time not understand properly what happen not connect device ? if not connect then two type issue in this first of may be usb socket not working in device second of may be micro usb cable if both working well then understand usb driver not installed in your computer or laptop if it is and not installing then you must be manual update from below link driver.

Requisite for this:

1. Xolo A700S device with good battery charged
2. Xolo A700S Stock rom Download Here
3. Xolo A700S Flash tool Download Here
4. Xolo A700S USB driver Download Here
5. Micro usb cable (must be working well)
6. Computer or Laptop


1. Take of all needed for this from above link (if link not working just leave your comment)
2. First do unzip from zip to any path (must be installed winrar)
3. Open usb driver folder and install first (if not .exe file then manual update)
4. Open Sp flash tool folder and choose flash_tool.exe file and open it
5. Click on Scatter-loading button and choose MT6572_Android_scatter.txt file
6. Click on Download button
7. Turn off device take our battery and insert again battery and insert usb cable
8. If device is to be Dead for detect Press and hold Volume Up button and insert usb cable
9. Wait until driver installing, if not installed do manual from the above link driver
10. Device detect automatically if installed successfully driver wait until full process
11. Do not disconnect device while in flashing mode
12. Congratulation you are done


Bijendra Narsinghani

Post A Comment: