May 13, 2016

Intex Aqua T3 V09 Flashing Tool Driver And Flash File

Before use first take all type data if device is live data like Contacts, Photos, Videos, Email, Notes, WhatsApp data because if you use this tutorial then data all are lost you can't save it if device is dead then sorry second impotent of if any link not working or dead so just leave your comment on below comment box if you don't write how to know ? so carefully read all are content after following step by step here some problems for you can't flash or upgrade see below.



If USB Driver not installed ? what happen ? 

If USB driver not installed in your computer or laptop you can't detect device with computer or if not connect with computer then you can't flash or upgrade it this is most impotent for flashing some time driver installed but can't connect device with computer so here need to manual update from device manager



Reason can't connect device with computer even if driver installed :

Some time driver installed or also manual update driver but not connect here also must check micro USB cable if cable broke or other problem then you can't connect device with computer and if you listen detect sound in computer and after not connect device and there display error of USB not recognized so this is error of battery low if you device battery low then you can't connect with computer or micro cable may be even bad



About Stock Rom Firmware Must read:

This flash file tested by me without any error working well,  you can use this flash file when your device hangs on logo problem, restarting problem, Screen lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro USB cable if not good then you can't flash it so check micro USB cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Necessary for Flash or Upgrade:

1. Intex Aqua T3 device

2. Intex Aqua T3 Stock Rom Firmware Download from here

3. Intex Aqua T3 Flash tool Download here

4. Intex Aqua T3 USB Driver Download here

5. Micro USB cable

6. Computer or Laptop

Process for flash or upgrade:

1. Download all are required from above link (if link issue just leaves your comment)

2. All are link unzip from zip to desktop or as you like path must be installed WinZip

3. Open Flash tool folder and choose flash_tool.exe file and open it

4. Click on Scatter-loading button and choose MT6572_Android_scatter.txt file and wait until read

5. After read stock rom click on Download button

6. Turn off device take out battery and insert battery just plug micro USB cable flash tool auto detect

7. Wait until driver install automatically if not installed driver just manual update from above link

8. After driver installed processing start and wait until finished (do not unplug device until finished)

9. Congratulation you are done


No comments:

Post a Comment